Close icon to exit the modal
Search icon

Ad Revenue and RPM Calculator: What 1,000 Pageviews Earn

RPM (revenue per mille) is the ad revenue a site earns for every 1,000 pageviews. Divide total ad revenue by pageviews and multiply by 1,000. Use the calculator to find your RPM or estimate your monthly ad revenue, then compare it with benchmarks for your niche.

Example: $1,250 from 100,000 pageviews is an RPM of $12.50.

RPM = ad revenue ÷ pageviews × 1,000

Build your page RPM

Move the levers to see where revenue is lost before an ad is ever paid for.

–
Page RPM

Same method as the Google News Initiative ad revenue lesson. Ads per page must stay within your network's policy and Better Ads standards.

What is a good RPM for your niche?

Publift's published ranges are per 1,000 sessions. Enter pages per session to compare them with your page RPM.

Site typeSession RPMEquivalent page RPMReference period

Source: Publift, What Is Ad Revenue? Page RPM = session RPM ÷ pages per session.

How much traffic does a revenue goal need?

January adjustment uses DataBeat's −32.5% month-on-month US CPM change for January 2026, via PPC Land.

How to estimate website ad revenue

Ad revenue comes from impressions that are both filled and seen, so an estimate starts with traffic and works through each loss along the way:

Revenue = pageviews × ads per page × fill rate × viewability ÷ 1,000 × CPM

Ads per page is the number of ad slots that load on a typical page. Fill rate is the share of those slots that receive a paid ad. Viewability is the share of filled ads a reader actually sees, and the IAB recommends 70% as a target. CPM is the average price buyers pay for 1,000 of those impressions. Change any one of the four and revenue moves in proportion, which is why the RPM builder above shows where the money is lost.

The RPM formula

RPM = ad revenue ÷ pageviews × 1,000

Ad revenue is everything the site earns from ads across all demand sources, after any revenue share is taken out. A pageview is one load of one page. It is not a session, which can include several pageviews, and it is not an impression, because one page can serve several ads. Dividing revenue by pageviews gives the value of a single pageview, and multiplying by 1,000 gives a figure that is easy to compare across months and sites.

Three worked examples

Finding your RPM. A site earns $1,250 from 100,000 pageviews. $1,250 ÷ 100,000 = $0.0125 per pageview. $0.0125 × 1,000 = an RPM of $12.50.

Finding what a traffic level earns. 400,000 pageviews at an RPM of $12.50. 400,000 ÷ 1,000 = 400 blocks of 1,000. 400 × $12.50 = $5,000 in revenue.

Finding the pageviews a revenue target needs. A $10,000 target at an RPM of $12.50. $10,000 ÷ $12.50 = 800 blocks of 1,000. 800 × 1,000 = 800,000 pageviews.

What is a good RPM in 2026?

It depends on the niche and where your readers are. Publift's 2026 ranges per 1,000 sessions run from $4 to $12 for lifestyle sites and $8 to $14 for gaming, through $10 to $18 for news, up to $12 to $35 for tech and SaaS and $15 to $40 for finance. To compare them with page RPM, divide by pages per session: a news site with 1.6 pages per session has a page RPM range of $6.25 to $11.25.

The time of year matters as much as the niche. RPMs usually peak from October to December and drop in January, when US programmatic CPMs fell 32.5% month on month in 2026, according to DataBeat.

RPM vs CPM vs eCPM

RPM is the publisher's number because it takes in everything that happens on the page: how many ads load, how many fill and how many are seen. Two sites with the same CPM can have very different RPMs for exactly that reason. The CPM calculator and the eCPM calculator cover the other two, and there is more on what eCPM is in our guide.

MetricWho uses itPer 1,000 of what
CPMAdvertisersImpressions bought
eCPMPublishersImpressions served
RPMPublishersPageviews

How to raise RPM without adding more ads

The fastest gains usually come from the ads already on the page. Move slots to where readers scroll and pause, so more of them are seen. Add demand partners through header bidding, so more buyers compete for each impression and fewer slots go unfilled. Fix slow pages, because an ad that loads after the reader has left earns nothing. Most publishers do this work themselves or hand it to managed ad operations.

Frequently asked questions

What is a good RPM for a website?

It depends on the niche and where readers are. Publift's 2026 ranges per 1,000 sessions run from $4 to $12 for lifestyle sites up to $15 to $40 for finance. Divide by pages per session to compare them with page RPM.

What is the difference between RPM and page RPM?

Page RPM is revenue per 1,000 pageviews and is what most people mean by RPM. Session RPM is revenue per 1,000 sessions, and equals page RPM multiplied by pages per session. Impression RPM is revenue per 1,000 ad impressions.

How do I increase my RPM without adding more ads?

Raise the value of the ads you already show. Place units where readers scroll and pause so more are seen, add demand partners so more bidders compete for each impression, and fix slow pages that load ads after readers leave.

Is RPM the same as eCPM?

No. eCPM is revenue per 1,000 ad impressions, so it measures what each impression earns. RPM is revenue per 1,000 pageviews, so it also reflects how many ads each page shows, how many fill and how many are seen.

How much ad revenue per 1,000 views?

That figure is your page RPM. A site with a $12.50 RPM earns $12.50 for every 1,000 pageviews, or $1,250 from 100,000 pageviews. Publift's 2026 niche ranges run from $4 to $40 per 1,000 sessions.

Ad Revenue and RPM Calculator: What 1,000 Pageviews Earn

Free RPM calculator for publishers: work out your page RPM, estimate monthly ad revenue and compare it with 2026 benchmarks by niche.

Disclaimer: Estimations are subject to your individual website and existing setup. Please note that these are estimates only. Contact us for a more detailed analysis or personalised demo by filling out the form above.

RPM (revenue per mille) is the ad revenue a site earns for every 1,000 pageviews. Divide total ad revenue by pageviews and multiply by 1,000. Use the calculator to find your RPM, the revenue a traffic level would bring, or the pageviews a revenue target needs.

Frequently Asked Questions

No items found.

Deep Dive into Programmatic Advertising

Play video
Play icon
Play video
Layout Teardown: Episode 3 — Cars.com's Sophisticated Ad Strategy
Play or video icon
46 mins watch
Layout Teardown: Episode 3 — Cars.com's Sophisticated Ad Strategy

In this week's episode, we're taking a look at cars.com, one of the biggest auto marketplaces in the US. Ben and Brock speak about the detailed insights and suggestions for optimizing cars.com’s ad revenue.

Publishers
Publisher Resources
Insights
Platforms
All
Play video
Play icon
Play video
What is AdSense Arbitrage? Best Practices for Using AdSense Arbitrage
Play or video icon
4 mins watch
What is AdSense Arbitrage? Best Practices for Using AdSense Arbitrage

We're delving deep into the world of AdSense arbitrage—a game-changing strategy where publishers invest in ads to drive traffic.

Publishers
Publisher Resources
Monetisation Strategy
Insights
Industry News

Ready to boost your ad revenue?

Are you an AdSense or Google Ad Manager user looking to grow your business?

AdSense is a great starting point, but it’s just one demand partner. Find out how you can get more revenue from your site without impacting users with Publift’s programmatic advertising platform Fuse.

Fuse is also built for Independent Publishers looking to access more premium demand partners.

Fuse is also built for Independent Publishers looking to access more premium demand partners.
Get even more competition for your ad inventory with access to over 25 premium demand partners. We’ll set you up with the best partners for your individual site, with personalised ad optimisations unique to your users and business model. Get access to all of your reporting in one place with our Fuse all-in-one automated reporting dashboard.

Are you an App Publisher or App Developer looking to increase your ad revenue?

Boost your in-app ad revenue and grow your business with Fuse Apps by Publift. We’ll give you access to over 10 app advertising demand partners, and make sure you have the right ad formats to maximise your revenue without impacting user experience.


Are you ready to power-up?

Get started